Lead Times

For all enquiries, please contact info@macindustries.co.uk or use our contact form.

 

Fibre Laser Cut Fixture Tables Lead Times

We do hold stock of most tables in popular sizes, so weather is a self-build or Ready Made order we can quick progress with your order. Unfortunately there are times were we would have to laser cut your table / made to order due to custom size, logo integration, low stock etc. If you want to give us a call or email to check stock before you order we can advise a more accurate lead times. 

 

• Instock - Self Build Mac Tables - 2>3 Working Days Despatch 
• Instock - Ready Made Mac Tables - 5>6 Workings Days Despatch 

• Made to Order - Self Build Mac Tables -  7>15 Working Days Despatch 
• Made to Order - Ready Made Mac Tables - 15>25 Workings Days Despatch (Depending on workshop load)

 

Fibre Laser Cut Tooling 

We do hold stock of all of our Mac fibre laser cut fixture table tooling (Unless specified in the listing) So weather is a self build or Ready Made order we can quick progress with your order. Unfortunately there are times were we would have to laser cut your tooling / made to order due to custom size, logo integration, low stock etc. We will advise you post order placement if there is a delay on the advised lead times below.

 

• Instock - Self Build Mac Tables - 1>2 Working Days Despatch 
• Instock - Ready Made Mac Tables - 2>3 Workings Days Despatch 

• Made to Order - Self Build Mac Tables -  7>8 Working Days Despatch 
• Made to Order - Ready Made Mac Tables - 8>10 Workings Days Despatch (Depending on workshop load)

 

 

All Other Store Items (Clamps / Castors / Bolts etc.) 

Stock items - despatched withing 1/2 days on a DPD Next day service.

 

Tolerances / Material condition 

As must as we like to offer extremely tight tolerances for all our tables and tooling we are working with HR sheet material which is de-coiled in the UK. Prior to us fibre laser cutting. Material has a sheet thickness tolerance of approx +/- 0.35 (depending on material thickness).

 

Unfortunately we cannot offer any tolerance on any self build tables or tooling. Ready made tables we can offer the following…

 

Hobby/ MiniPRO +/- 1.5mm

MidiPRO +/- 1mm

PRO +/- 1mm

ULTRA +/- 0.5mm

 

Alternative MAC Milled tables

If your looking for extremely fine tolerances we also offer milled / nitrated tables starting from 1x1m to 4x2m where we can offer down to +/- 0.15mm